Microlinks Hair Extensions: DIY Install, Pros, Cons, & More

Microlinks (or micro links) accept become increasingly pop in the natural hair community over the past few years. Chances are you've seen someone with them without even knowing it.

If you want to endeavour microlink hair extensions just would rather skip the expensive installation appointment with a stylist, this guide is for you.

We'll tell yous step-by-step how to exercise microlinks at home similar a pro.

Table of Contents

• ane What are Microlinks?
• 2 How to Do Microlinks: Stride-By-Step
  • 2.1 Purchase Your Supplies
  • 2.2 Launder, Condition, and Deep Condition
  • 2.iii Post-Launder Prep
  • ii.four Cornrow the Perimeter
  • two.5 Install the Microlinks Using the I-Tip Method
• 3 Install Braidless Sew-in Microlinks
• 4 How To Remove Microlinks
• 5 Dos and Don'ts of Microlinks
  • five.ane Dos
  • 5.2 Don'ts
• 6 Oftentimes Asked Questions
  • 6.ane How Long Practice Microlinks Take?
  • 6.two How to Sleep With Microlinks
  • 6.iii How Dissentious Are Microlinks?
  • half-dozen.4 What Tin Replace Microlinks?
  • 6.5 How Much Does Microlinks Cost?
  • 6.6 What Is the Metowi Method?
  • 6.vii How Close Should Microlinks Be for LA Weave?
  • 6.8 How Many Microlinks Are Needed for a Full Head To Exist Done?
  • 6.9 How Long Exercise Microlinks Last?
  • 6.10 Conclusion

What are Microlinks?

Microlinks are a type of pilus extension where the extension is attached to individual hair strands by using minor silicone beads (i.e., microbeads). Microlinks (also chosen micro link hair extensions) last for several weeks before they demand to exist removed or re-fitted.

One of the chief appeals of microlinks is that they are most impossible to detect post-installation (when installed properly), creating the perfect blend betwixt your real hair and the extensions.

How to Do Microlinks: Footstep-Past-Stride

Now that you know a little bit nigh what microlinks are and how they piece of work let's get into how to do microlinks step-past-stride. With the below instructions and some practice, you'll exist able to do microlinks on your ain hair rapidly and easily.

Purchase Your Supplies

It'south imperative to make sure you've got all you demand before y'all go started. Here are the supplies you lot'll demand for the styles.

• Shampoo and Conditioner
• Deep-Conditioner
• Get out-in Conditioner
• Rat Tail Comb
• Accident-dryer
• Moisture brush
• I-Tip Extensions (for traditional microlink pilus extensions)
• Weft extensions/hair bundles (for braidless sew-in only)
• Microbead tool kit (pliers, pulling claw needle, microbeads)
• Heat protectant
• Pilus tie
• Scissors (for braidless sew-in only)
• Alligator clips
• Wide-tooth comb
• Needle and thread for weave (for braidless sew-in only)

Launder, Condition, and Deep Status

Outset off with a thorough shampooing session with a non-sulfate moisturizing shampoo. The shampoo will become rid of droppings without stripping your hair of all its natural moisture.

If you lot accept visible buildup, shampoo twice. Later your hair is clean, move on to the conditioning step. Apply your moisturizing conditioner all over your pilus, paying special attention to the ends, which are usually the driest.

Use this time to detangle your hair with a wide-toothed comb – the slipperiness of your conditioner will make the detangling procedure effortless.

For super dry out natural pilus, a deep conditioning treatment may exist necessary – in this case, follow the instructions on the deep conditioner packaging.

Post-Wash Prep

After shampooing and conditioning (or deep conditioning) your hair, break out your exit-in conditioner and use it to all of your hair strands. Feel free to rummage it through for even distribution with a wide-tooth comb.

This step volition requite your hair an additional layer of hydration to protect information technology during and after the styling process.

Now that your hair is sufficiently hydrated, it's fourth dimension to dry out and stretch your pilus. All you need to do for this step is apply your favorite estrus protectant and accident-dry your hair.

Utilise your fingers or a moisture brush to stretch your hair and promote elongation. If you lot need to separate your hair into several sections to go your hair sufficiently stretched, do and then – you lot'll thank yourself later.

Cornrow the Perimeter

Part and cornrow the hair around the perimeter of your head (most two inches) – this will be the get out out. It's important to exit some of your hair out, peculiarly if you like to pull your hair upwards into a ponytail or experiment with half-upwardly, half-downwards styles.

You lot can do ane braid that goes around your head or create several braids if you can't braid in every direction.

If you want a middle part, side part, or deep side office, be sure to function your pilus accordingly and braid it. Yous'll install the microlinks on the remainder of your pilus (the unbraided portion).

Install the Microlinks Using the I-Tip Method

Itip microlink extension install on natural hair (NEVER AGAIN)

Now for the all-time part – installing your microlinks! The installation process is non difficult to do past whatever ways, but it tin exist problematic for newbies. To ensure a smooth procedure, follow the instructions beneath.

1. Create a horizontal part above the complect at the nape of your neck using your rat tail comb. The part should be nearly an inch loftier and extend from the complect on the left to the braid on the correct.
2. Secure the rest of your loose pilus using a hair tie.
3. Begin past parting one-inch boxes along the row. After departing each box, thread your hair through 1 of the microlink beads using your pulling hook needle. By the stop of this stride, you should take a row of box-shaped parts with microlinks attached.
4. Choose one of the sections, push the top of an extension strand into the microbead, and then clamp downward the bead with the pliers. This will secure the extension pilus. Repeat this on each of the sections in the row.
5. Repeat steps i through 4 for all of your loose natural hair.
6. Style your hair and extensions as desired.

Install Braidless Sew-in Microlinks

Microlinks/Braidless Run up In Install!

Another popular way that women use microlinks is to do a braidless sew-in. Hither are the instructions for this installation technique.

1. With your rat tail comb, make a horizontal function above the braid at the nape of your neck.
2. Use a hair necktie to keep the rest of your loose hair out of the fashion.
3. Hold the weft extensions upwards to the function you lot but made and measure the length from i terminate to the other.
4. Cut the weft so that it's the same length as your part.
5. Hold the weft extensions up to the part once more and clip each end of the extensions in identify.
6. Starting at one end of the row, use your rat tail comb to lift upwardly a 1-inch broad section of the extensions forth with some of the natural hair underneath the weft.
7. Utilize the pulling hook needle to thread the section y'all simply lifted through a microbead.
8. Use the pliers to clamp down the microbead.
9. Repeat steps half dozen through 8 across the weft – you'll accept anywhere from 4 to 8 microbeads for the row.
10. If you want to add more thickness to the concluding look, cut another weft the same length, place information technology immediately above that weft, and then sew the two together with a curved needle and weave thread.
11. Repeat steps 1 through 10, moving upwardly until y'all've got no loose hair left (besides your leave out).
12. Unbraid your go out-out and way every bit desired.

How To Remove Microlinks

Extremely DETAILED: How to REMOVE MICROLINKS & ITIPS Safely | UP CLOSE & PERSONAL

Dos and Don'ts of Microlinks

While the above instructions are straightforward, in that location are some nuances you should definitely be aware of. Let's explore the dos and don'ts of microlinks below.

Dos

• When doing I-Tip extensions, secure the microbead near the bottom function line, or else your extensions won't lay flat.
• Ever prep your hair before installing microlinks.
• Ensure that your hair is free of oily products before installation.

Don'ts

• Don't install microlink extensions on weak or damaged hair. Doing so tin can lead to more damage and eventually breakage.
• Don't wear microlinks for longer than four to six weeks at a time if you lot want to preserve the wellness of your hair.
• Don't install the microbeads too close to your scalp, as they can pull your pilus and even break it off at the root.
• Don't be afraid to skip rows when installing microlinks or a braidless sew together-in. If the end effect is too bulky, you will not be able to attain a natural-looking upshot.

Oftentimes Asked Questions

How Long Do Microlinks Take?

It typically takes 2 to three hours for a stylist to install micro bead hair extensions, simply the time it takes can vary. This length of time also depends on how much hair is being installed.

How to Sleep With Microlinks

When sleeping with microlink hair extensions, yous could opt for a way like braided plaits or ponytails, which will restrict the movement of your hair enough to protect the bonds from coming loose and breaking during the night. You could also wrap your hair with a scarf or a satin bonnet.

How Damaging Are Microlinks?

Microlink hair extensions do not require the utilise of estrus, adhesives, or other chemicals, so when installed properly, your natural hair should be fine as long as the extensions arent too heavy.

What Can Replace Microlinks?

If you're not a proficient candidate for microlinks or y'all're unsure of the fiscal delivery, there are even so options. We recommend trying record-in extensions, sew-in extensions, and clip-in extensions.

How Much Does Microlinks Cost?

Prices for microlinks hair extensions vary between stylists, salons, the quality of the bundles, location, and the piece of work information technology takes to reach your desired issue. The costs can range from $300 – $grand. Services like hair color, cutting, and other add-ons can increase those prices as well.

What Is the Metowi Method?

For more than twenty years, Metowi Willingham has been one of the globe's most sought-later on hairstylists. With a passion for pilus extensions and 12 years of experience as a business owner, her expertise is rooted in these facets. The Metowi Method is a technique that focuses on the health and retentiveness of your natural hair texture. Click here to learn more almost the Metowi Method.

How Close Should Microlinks Be for LA Weave?

The LA Weave is a braidless weave that consists of a line of rings sewn close to the scalp, and hair extensions are then added. A section of hair is threaded through each micro ring and then pressed into place with pliers. In the weft method, the pilus is initially sewn onto the tracks.

How Many Microlinks Are Needed for a Full Head To Be Done?

A full head of extensions volition require approximately 200-300 strands. A one-half head will crave 100-150 strands.

How Long Practice Microlinks Last?

Microlink pilus extensions can concluding 10-12 weeks, depending on care and maintenance. Information technology'south critical that you take care of your hair while wearing extensions to mitigate the possibility of potential damage.

Decision

Microlinks are pilus extensions that attach to your pilus strands with small silicone beads. They concluding for several weeks earlier they demand to be removed or replaced, and ane of their master appeals is that they are nearly impossible to notice mail service-installation creating a very natural look.

The extensions blend well with human hair and tin can be used on any hair type, including relaxed pilus and kinky, curly hair types.

If you're looking for an option with more versatility than traditional weaves but less work than installing clip-in extensions, then we hope this commodity has provided you with all the information you need to install microlinks correctly. We wish you the best in all of your hair styling endeavors!

sosawhaverearld83.blogspot.com

Source: https://www.curlcentric.com/microlinks/

Share this post